Guidelines For Operation; Using The Battery Pack - Pulsar N450 Manual De Usuario

7

Guidelines For Operation

The riflescope has been designed for long-term use. To ensure long performance,
please adhere to the following:
•
Before use, make sure that you have installed and fixed the mount according to
the instructions of the section "Installation of mount".
•
Store with the lens cover on in the carrying case.
•
Turn the riflescope off after use.
•
Attempts to disassemble or repair the scope will void the warranty!
•
The riflescope can be used in various operating temperatures. However, if it has
been brought indoors from cold temperatures, do not turn it on for 2 to 3 hours.
This will prevent external optical surfaces from fogging.
•
If the scope is unable to mount onto the rifle securely, or you have doubts
about the mounting system, see a qualified gunsmith.
•
Using a rifle with a poorly mounted scope can lead to inaccurate target shooting!
•
To ensure reliable performance, it is recommended to carry out regular
technical inspections of the unit.
•
To ensure optimal image in the daytime, the lens cover with integrated filter
must be closed.
8

Using The Battery Pack

The riflescope is supplied with a rechargeable Li-Ion Battery Pack IPS5.
Please remember to charge the Battery Pack before first use.
Charging:
•
Lift the lever (C) of the charger.
•
Remove the protective cover from the Battery Pack.
•
Install the Battery Pack into the charger as shown in Pic. 3 – lower the lever (С).
•
Upon installation, a green LED indicator (D) on the charger will start to glow and
begin flashing:
once - if the battery charge ranges from 0% to 50%;
twice - if the battery charge ranges from 51% to 75%;
three - times if the battery charge ranges from 76% to 100%;
С
Charging base
D
Battery
E
Charger
Fig.
4
Socket
7