Status Bar - Pulsar N450 Manual De Usuario

16

Status Bar

1 2 3
The status bar is located in the lower part of the display and shows information
on the actual operating status of the riflescope, including:
1.
Actual zeroing profile
2.
Zeroing distance (distance is not shown before zeroing is done)
3.
Sum Light (off/on)
4.
Wi-Fi connection status
5.
IR Illuminator's power level (for example level 3)
6.
Full magnification (optical + digital zoom)
7.
Function "Auto shutdown"
8.
Running time
9.
Battery charge level (if the riflescope is powered by the Battery Pack)
Or External battery power indicator (if the riflescope is powered by an external
power supply)
Or Battery charge with current level in per cent (if battery is installed or it is being
charged by external power supply)
The status bar shows the distance value at which zeroing was initially done.
After multiple zeroing distances are set, the status bar shows the distance value
selected in the quick menu.
17 Wi-Fi Function
Your riflescope features wireless connection option (Wi-Fi) which links it with
external appliances (tablet, smartphone).
Turn on the wireless module the with a long press of the UP (8) button. Wi-Fi
operation is shown in the status bar as follows:
Wi-Fi Connection status
Wi-Fi is off
Wi-Fi activated by the user,
Wi-Fi in the riflescope is being activated
Wi-Fi is on, no connection with riflescope
Wi-Fi is on, riflescope connected
•
Your riflescope is detected by an external device as "Digisight Ultra_XXXX",
where XXXX – is the last four digits of riflescope's serial number».
•
After a password is generated on an external appliance (please refer to the menu
option "Wi-Fi setup" of the section "Main menu functions" of this user manual)
and connection is established, icon
4 5
in the status bar changes to
6 7
Status bar icon
8 9
.
21