Pulsar N450 Manual De Usuario página 27

Scan the QR codes to download Stream Vision free of charge:
24 Connection to PC via USB
•
Connect one end of the USB cable to the Micro-USB (15) port of your riflescope,
and the other end to the USB port of your PC/laptop.
•
Turn the riflescope on with a brief press of the ON (5) button (riflescope that
has been turned off cannot be detected by your computer).
•
The computer will detect your riflescope automatically; no drivers need to be
installed.
Two connection modes will appear on the display:
Memory card (external memory) and Power.
•
Select connection mode with UP and DOWN buttons.
•
Confirm selection with a brief press of the M (9) button.
Memory card
•
Memory card (external memory). In this mode the computer detects the
riflescope as a flash card. This mode is designed to manage the files saved in
riflescope's memory. The riflescope's functions are not available in this mode;
the riflescope turns off automatically.
•
If video recording was in progress when connection was made, recording stops
and video is saved.
•
When USB is disconnected from the riflescope in the USB Mass storage riflescope
mode, the riflescope remains OFF. Turn the riflescope ON for further operation.
Power
•
In this mode your PC/laptop is used as an external power supply. The status bar shows
icon . The riflescope continues operating and all functions are accessible.
•
The IR will switch off and cannot be switched on.
Note: The Battery pack installed in the riflescope is not being charged!
•
When USB is disconnected from the riflescope in the Power mode, the riflescope
keeps operating with Battery Pack, if available, and it has sufficient charge.
Google Play (Android OS)
https://play.google.com/store/apps/details?id=com.yukon.app
iTunes (iOS)
https://itunes.apple.com/us/app/stream-vision/
id1069593770?mt=8
25