Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Babytalker 3100
7.1
Baby Unit Components
See Figure
A
on the fold-out page.
1
Night light
2
Power LED
3
Night light button
4
On/Off switch
5
Paging button
6
Microphone
7.2
Parent Unit Components
See Figure
on the fold-out page.
B
11 Volume LEDs
12 Loudspeaker
13 Link LED
14 Increase volume
15 On/Off switch
16 Decrease volume / Previous menu
item
8
Initial use
8.1
Package Contents
The equipment is supplied as standard with the following items:
- 1 baby unit
- 1 parent unit
- 1 charging station
- 2 AC mains adapters
8.2
Installing Batteries in the Baby Unit
See Figure
on the fold-out page.
A
•
You can operate the baby unit with three AA cells (LR06/Mignon; we recommend alkaline
cells) or the included AC mains adapter.
•
The baby unit cannot recharge batteries.
•
It is recommended to always leave the batteries in the unit, even if you use the AC mains
adapter. The unit will automatically switch to battery power in case of a mains power
interruption.
– Rotate the belt clip
– Turn the screw on the cover of the battery compartment
unit 90° counterclockwise and remove the battery compartment cover.
•
Do not turn the screw past the 'Open' point.
– Fit three AA alkaline cells (LR06/Mignon) in the battery compartment.
Ensure that the polarity is correct.
– Close the battery compartment.
•
Never mix used cells with fresh cells.
7
8
9
10 NEMO radiation switch
17 Power LED
18 Belt/wall fastening clip
19 Battery compartment cover
20 Charging indicator
21 AC mains adapter
- 1 user guide
- 1 service card
- 1 NiMH rechargeable battery pack
9
upward.
Battery cover closing screw
Connector for AC mains adapter
Fixing clips
7
at the back of the baby
OPEN
SEDS
1
x
A
A
LONG
6V/300mA
+
-
ECO
1
x
A
A
5
Tabla de contenido
