Automatic Power Failure Recovery - EXFO FTB-8510B Guia Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

22 Automatic Power Failure
Recovery
The automatic power failure recovery is used to re-create and restart the
test that was running before the power failure. A test that was created and
not running before the power failure will be re-created but not started. The
configuration of the test is saved automatically once the test is created. The
logger, injections, and configuration are periodically saved.
The following requirements control the power failure recovery process:
1. The power failure occurred while the test case is created. A power
failure condition occurs when the AC power is down while the unit's
battery has not sufficient power to keep the unit running.
2. The Startup Application is enabled for this module from the FTB-500
ToolBox. Refer to the ToolBox user guide for more information.

Automatic Power Failure Recovery

If the requirements number 1 and 2 are met, the saved configuration will
be loaded when the unit is rebooted after a power failure. Thus, the test
that was running will be re-created, configured, and restarted; the test that
was not running will be re-created and configured.
However if the FTB-500 has no batteries, the power failure recovery will
only work when Windows is not requiring a user name and password.
Note that the FTB-500 is set to require user name and password by default.
To disable Windows user name and password on the FTB-500, do the
following:
Logon as Supervisor.
Press Start, Programs, Accessories, System Tools, and User Accounts
(Advanced).
Select a user account.
Clear the User must enter a user name and password to use this
computer check box and enter a password to confirm.
SONET/SDH Application
555

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ftb-8510gFtb-8525Ftb-8535Ftb-8120nceFtb-8103nce

Tabla de contenido