EXFO FTB-8510B Guia Del Usuario página 1129

LCAS Source - Configuration
Press TEST, LCAS and Configuration (under LCAS Source).
Note: Not available in Through mode.
Member indicates the timeslot number.
Auto Add at Startup: Allows enabling the members that will be
automatically added (applied) when the test is started.
Remote DUT
Non-LCAS: Specifies that the remote device connected to the FTB-8100
Series is LCAS (when disabled) or Non-LCAS (when enabled). Remote
DUT, when Non-LCAS is enabled, is used to test the interoperability
between an LCAS and a VCAT device that does not support LCAS.
Alarm
Note: Not available when Non-LCAS from the Remote DUT group is enabled.
PLCT Threshold (Partial Loss of Capacity Transmit Threshold): Allows the
selection of the PLCT threshold value. Choices are from 1 to the
provisioned member minus 1. The default setting is 1.
SONET/SDH Application
Next-Generation Tabs
LCAS - Source
479