Displaying Stored Measurements; Measuring Object Temperature/Room Temperature - Beurer medical FT 100 Instrucciones De Uso

Displaying stored measurements

The device only stores measurements in forehead temperature mode
values from the last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• The memory can be called up as follows:
• With the thermometer switched on, press and hold the MODE/MEM button for 5 seconds.
The most recent measurement is displayed.
• With each subsequent pressing of the MODE/MEM button, first the memory space number is displayed, fol-
lowed by the measurement when the button is released.
• In the upper line, the time and date are displayed alternately.

9. Measuring object temperature/room temperature

If you want to measure an object temperature with this thermometer, switch
to object temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM button.
The device switches to the object temperature mode (Fig. 15).
• Hold the thermometer 2 to 3 cm from the measuring point. Briefly press the
sCAN button and read the temperature on the display (Fig. 16).
Measurements taken in object temperature mode are not stored.
. The device automatically stores the
38
Fig. 15 Fig. 16