Displaying Stored Measurements; Replacing The Battery - Beurer medical FT 58 Instrucciones De Uso

7.4 Displaying stored measurements

The ear thermometer automatically stores the last 10 temper­
ature measurements of body and object temperature respec­
tively (incl. date and time). To recall the stored measurements,
proceed as follows:
1. Press the ON/OFF button
switch on the ear thermometer.
2. Press and hold the ON/OFF but­
ton for 3 seconds. An M and
the last stored measurement ap­
pear on the display.
3. To switch between the individu­
al stored measurements, press
the ON/OFF button
each subsequent pressing of the
ON/OFF button , the memory
space number is displayed fi rst
followed by the measurement.
4. If you would like to proceed with a measurement, press the
START button. Press and hold the ON/OFF button
onds to switch off the ear thermometer.
to
. With

8. Replacing the battery

Before replacing the battery, ensure that the device is switched
off .
1. Replace the batteries as soon as the
battery symbol ( battery symbol (
display.
2. Slide open the battery compartment
and remove the used batteries from
the battery compartment.
3. Insert two new 1.5 V AAA batteries.
Make sure that the batteries are in­
serted the right way round. Close the
battery compartment.
for 3 sec­
22
) appears on the