Cleaning; Troubleshooting; Technical Data - Profi Cook PC-ICM 1091 Instrucciones De Servicio

Preparation time with the ice cream maker: ap-
prox. 30 - 40 minutes
Refine the taste by adding 1 tablespoon of liqueur,
cognac, raspberry brandy or similar at the end of
the freezing operation.
Sorbet should be eaten quite quickly to prevent it
from getting liquid again.

Cleaning

WARNING:
Always disconnect from mains power supply
before cleaning.
CAUTION:
• Do not use harsh or abrasive cleaning agents.
• Do not use chemicals, acids, petrol or oil
products.
• Do not submerge the appliance in water.
Ice cream container, stirrer and lid
CAUTION:
The components are not suitable for cleaning
in dishwashers. They could get deformed or
discolored by heat and aggressive cleaners.
Clean components that come into contact with
foods in soapy water.
Base and recess
Clean the base and the recess with a damp cloth.

Troubleshooting

Problem Possible Cause Solution
No function. No power supply. Check the
52
Problem
The device
activates
standby mode,
although the
ice cream
preparation
has not yet
finished.
Compressor
noisy.
The stirrer
stops during
operation.
The
appears in the
display, but the
compressor
does not turn
on.
Model: ................................................ PC-ICM 1091
Voltage supply: ..........................220-240 V~, 50 Hz
Power input: ................................................... 150 W
Refrigerant: .............................................R600a/30g
Capacity, max.: ............................................1500 ml
Max. filling quantity: .....................................1200 ml
Protection class: ...................................................... I
wall outlet
Net weight: .......................................approx. 11.5 kg
with a different
appliance; con-
The right to make technical and design modifica-
nect the plug
tions in the course of continuous product develop-
properly to the
ment remains reserved.
wall outlet.
Possible Cause Solution
The power
supply has been
disconnected.
Mains power
supply too low.
The ice cream
is too hard and
blocks the mo-
tor (Protection
mechanism).
icon The overheat
protection has
been triggered.

Technical Data

Start the pro-
gram again for
the remaining
time.
Turn the
appliance off
and check the
mains power
supply.
Switch off the
device and
disconnect the
mains plug.
Remove the
ice cream.
Let the device
cool down for
approx.
30 minutes
before starting
again.