Approx. amount
in ml
250
700
1200
Protection mechanisms
• If the stirrer stops during operation due to
solidification of the ice cream, the motor will be
blocked.
1. Switch off the device immediately and dis-
connect the mains plug.
2. Remove the ice cream.
• You can start another ice cream program
immediately after the previous program has fin-
ished. For safety reasons though, the compres-
sor will only turn on after approx. 5 minutes.
• If you have prepared several ice cream batches
in sequence, the overheat protection might
get triggered. In such a case, the compressor
will not turn on. Let the device cool down for
approx. 30 minutes before starting again.
Preparation
NOTE:
• Use ingredients that are of 6 - 8°C fridge
temperature.
• The ingredients must not be frozen; otherwise
the motor could get blocked.
1. Place the ice cream container in the recess of
the base.
2. Place the stirrer on the shaft in the ice cream
container.
3. Fill the ice cream container with the desired
ingredients.
CAUTION:
Do not fill the ice cream container with ingre-
dients of more than 1200 ml!
• When making ice cream with fruits, only use
soft, seedless fruits and pulp (puree) them
beforehand. You can also add fruit juice.
50
Approx. time
in min.
20 - 25
30 - 40
60
4. Place the lid on the device, aligning the lugs ac-
5. Close the fill opening with its cap.
1. Connect the mains plug to a wall socket.
2. Switch on the device using the POWER button.
3. Press the START/STOP button. The default
4. After the time has elapsed, the device will emit
5. The device features a post-cooling function. If
Removing the ice cream
1. Switch off the device using the POWER button.
2. Disconnect the mains plug from the wall socket.
3. Turn the lid towards the
4. Remove the ice cream container and the stirrer.
• When making ice cream with solid pieces
of fruits, nuts, brittle, or with alcohol, wait
towards the end of the cooling time before
adding such ingredients.
NOTE:
• Alcohol impedes the freezing operation.
• Add the pureed fruits and/or alcohol
through the fill opening.
cordingly. Turn the lid towards the
it locks into place.
Using the device
program of 60 minutes starts.
10 signal sounds.
you do not switch off the device within
10 minutes, the cooling function will be reacti-
vated for another hour.
NOTE:
We recommend removing the ice cream
immediately, in order for the ice cream not to
freeze solid inside the container.
WARNING: Risk of cold burns!
Protect your hands wearing gloves when
touching the ice cream container.
CAUTION:
Remove the ice cream from the container
using the spatula provided or a silicone or
wooden spoon. Do not use metal spoons in
order not to scratch the container coating.
icon until
icon.