Service And Maintenance - Festool CTL 26 E AC HD Manual De Instrucciones

CTL /M
GB
9

Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!

All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Only use original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
Clean the level sensors regularly [6], check for dam-
age and empty the dirt trap [1-3].
Damaged safety devices and components must be
repaired or replaced in a recognised specialist work-
shop, unless otherwise indicated in the operating
manual.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine is
sealed properly and the monitoring features are
functioning correctly.
– Anything that cannot be cleaned must be discarded
in impermeable bags. Observe applicable disposal
regulations!
– For user servicing, the machine must be disman-
tled, cleaned and serviced, as far as is reasonably
practicable, without causing risk to the mainte-
nance staff and others. Suitable precautions in-
clude, decontamination
provision from local filtered exhaust ventilation
where the machine is dismantled, cleaning of the
maintenance area and suitable personal protec-
tion.
9.1 Filter bag / disposal bag / main filter

Remove the filter bag [7].
16
before dismantling,

Insert the filter bag [8].

Remove the disposal bag [9].

Insert the disposal bag [10].

Change the main filter [11].
Dispose of the used filter in accordance with stat-
utory regulations.
 The order numbers for accessories, filters and
consumables can be found in the Festool cata-
logue or on the internet at www.festool.com.
10 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used
electric power tools must be collected separately
and handed in for environmentally friendly recy-
cling.
Information on REACh: www.festool.com/reach
11 EU Declaration of Conformity
Mobile dust extractor
CTL 36 E AC HD
CTM 36 E AC HD
CTL 26 E AC HD
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EC, 2004/108/EC (up to 19.04.2016), 2014/
30/EU (from 20.04.2016), 2011/65/EU
EN 60335-1, EN 60335-2-69, EN 50581
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Wolfgang Zondler
Head of Research, Development and Technical
Documentation
Wendlingen, 2016-04-01
Serial no.
499834, 499837
499838, 500421,
202063
202077