Ordering Information - Mettler Toledo M80SM Manual De Instrucciones

en
26
7 MODBUS configuration
MODBUS specific settings (baud rate, device
address, etc.) can be adjusted when the M80 SM
is connected to the Transmitter Configuration Tool
PC Software via the Transmitter Configuration
Box with USB adapter. Please refer to the Trans-
mitter Configuration Box manual for details.
Please download the M80 TCT software from
www.mt.com/M80.
8 Cleaning/storage
Clean the surfaces of the M80 SM transmitter
with a soft damp cloth, then dry the surface with
a cloth, carefully. Do not use any solvents or
water to clean connecting parts of connectors!
For storage, the device should be clean and dry.
9 Ordering information
Item
M80 SM Transmitter
Transmitter Configuration Box
5-pin data cable 2 m (6.6 ft)
5-pin data cable 5 m (16.4 ft)
5-pin data cable 10 m (32.8 ft)
ISM is a registered trademark of the METTLER TOLEDO Group
in Switzerland, Brazil, USA, China, European Union, South
Korea, Russia and Singapore.
All other trademarks are the property of their respective holders.
M80 SM
30 530 859 A
M80 SM Sensor Mount Transmitter
Ordering number
30 530 566
30 530 567
52 300 379
52 300 380
52 300 381
© 08 / 19 Mettler-Toledo GmbH
Printed in Switzerland