Butler ERGOLOCK.CB Manual De Instrucciones página 38

2. Dowel the wheel (Fig. 29 pos. 1) on the locking
platform and check that the dragging pin (Fig. 29
pos. 2) enter in a hole placed on the rim hub.
Fig. 29
3. If the wheel hub is higher then the dragger (Fig. 30
pos. 2), use the extension (Fig. 30 pos. 1) supplied
on issue.
Fig. 30
INSTRUCTION, USE AND
MAINTENANCE MANUAL
4. Insert the shaft and the relative cone (Fig. 31 pos.
5. Turn of 90° (Fig. 32 pos. 1) and lift the shaft (Fig.
6. Lifting the shaft (Fig. 33 pos. 1) through the proper
Page 38 of 116
1) on the rim (Fig. 31 pos. 2).
Fig. 31
32 pos. 2) to hook it inner the hole.
Fig. 32
handle (Fig. 33 pos. 2), turn the ring nut (Fig. 33
pos. 3) until the complete cone clamping (Fig. 33
pos. 4) on the wheel (Fig. 33 pos. 5).
7102-M004-0_B
GB
ERGOLOCK.CB - AD - ST