Maintenance And Service; After-Sales Service And Application Service - Bosch 4Exact Manual Original

OBJ_BUCH-3072-001.book Page 14 Wednesday, December 21, 2016 2:15 PM
14 | English
Overload protection (see figure E)
If the constant voltage regulator is overloaded, the indicator
14 lights up. When the indicator 14 is lit up, this means a mal-
function has occurred. Stop working. Switch off the screw-
driver and constant voltage regulator. Leave the constant
voltage regulator to cool down for around 20 minutes.
Then start again.
If the indicator 14 lights up repeatedly, the constant voltage
regulator is faulty. Have it repaired by an authorised customer
service point for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning
 Disconnect the constant voltage regulator from the
mains before performing cleaning tasks. This avoids the
risk of electric shock. Switching off the constant voltage
regulator alone is not sufficient.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
The constant voltage regulator requires no maintenance. Al-
ways keep the constant voltage regulator and ventilation slots
unobstructed and clean.
Regularly clean the connection sockets, couplings and plugs
of the constant voltage regulator (after it has been discon-
nected from the power-supply system) with a dry, lint-free
cloth, and remove dust and dirt particles.
 Have maintenance and repair work performed exclu-
sively by a qualified specialist. This will ensure that the
safety of the constant voltage regulator is maintained.
An authorized Bosch after-sales service agent will carry out
this work quickly and reliably.
 Observe all applicable environmental regulations when
disposing of old grease and solvents.
Accessories
You can purchase the voltage adapter for voltages of 9.6 V,
12.0 V and 14.4 V, the wall bracket 11 and the power cable
(supply cable for appliances which do not generate any signif-
icant heat during use) from your specialist retailer. Information about the complete quality accessory program
can be found on the Internet at www.bosch-pt.com and
www.boschproductiontools.com or at your dealer.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
1 609 92A 3HF | (21.12.16)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: [email protected]
Bosch Power Tools