Unpacking And Cleaning - Delta TS350 Manual De Instrucciones

A. - 19" Top Front and Rear Braces (2)
B. - Top Side Braces - 16-1/2" in length (2)
C. - 22-1/2" Bottom Front and Rear Braces (2)
D. - Bottom Side Braces - 20" in length (2)
E. - Stand Legs (4)
DUST COLLECTION CONNECTOR
Do not install this dust chute unless you will be
using a dust collector.
1. - Adapter Plate
2. - Dust Collection Hood
3. - Adapter Plate
4. - #10x1/2" Sheet Metal Screws (4)

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
B
D
G
Fig. C
A
C
E
H
F. - Feet (4)
G. - 3/8" Flat Washer (32)
H. - M8 x 1.25x16mm Carriage Head Screw (32)
I. - M8 x 1.25 Hex Nut (32)
1
Fig. D
8 - English
I
F
2 3
2
4