Safety Precautions - Chauvin Arnoux PAC 12 Manual De Instrucciones

Deutsch ...................................................................................................................... 16
Italiano ........................................................................................................................ 23
Español ...................................................................................................................... 30
Thank you for purchasing a Clamp for oscilloscope.
For best results from your instrument:
„ read these operating instructions carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.
WARNING, risk of electric shock. The voltage applied to parts marked with this symbol may
be hazardous.
Equipment protected by double insulation.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2002/96/EC.
„ Only use the clamp indoors.
„ Do not expose the clamp to running water.
„ Do not use the clamp on uninsulated conductors at a voltage of more than 600 V in relation to the earth.
„ For measurements on DC current, check zero output. Adjust if necessary (see "Operating procedure").
„ During measurement, ensure that the conductor is in line with the markings on the jaws and that the
clamp closes correctly.
„ Your clamp is supplied with a set of adhesive labels. Choose the label for your language and stick it
to the back of the case.
Our guarantee is applicable for twelve months after the date on which the equipment is made
available (extract from our General Conditions of Sale, available on request).

SAFETY PRECAUTIONS

WARRANTY
9