Intended Use; Connections; Assemblies - Vaillant atmoMAG mini 11-0/0 XZ Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.3

Intended use

The atmo MAG gas instantaneous water heaters are
state-of-the-art appliances which have been constructed
in accordance with recognised safety regulations.
Nevertheless, dangers to the life and limb of the user or
third parties can still occur or the appliance or other
material assets may be impaired in the event of improp-
er use or use for which the appliance is not intended.
The gas instantaneous water heaters are specially
designed for providing hot water using gas. Any other
use or extended use is considered to be use other than
intended. The manufacturer/supplier is not liable for
any resulting damage. The user alone bears the risk.
The use of the gas water heater in vehicles is not
classed as intended use. Units that are not classed as
vehicles are those that are installed in a fixed and per-
manent location (fixed installation).
Intended use includes the observance of the operating
and installation manual and all other applicable docu-
ments, as well as adherence to the maintenance and
inspection conditions.
Caution!
Any improper use is forbidden.
The gas instantaneous water heater must be installed by
a qualified engineer, who is responsible for adhering to
the existing regulations, rules and guidelines.
2.4

Connections

Danger!
Danger of scalding and damage due to escaping
hot or cold water. If plastic pipes are used for
the hot and/or cold water connections of the
device, only pipes which are temperature-resist-
ant to 95°C at a pressure of 10 bar may be
used.
Appliance connections:
– Water 3/4"
– Gas 1/2"
• After deciding where to install the appliance, you must
lay the gas and water pipes to the connection points
on the appliance.
Installation manual atmoMAG
Description of the appliance 2
2.5

Assemblies

11
10
9
8
Fig. 2.1 Assemblies
Key
1
Flue gas sensor
2 Flow cutout
3 Safety temperature limiter
4 Heat exchanger (heating element)
5 Ignition electrode
6 Burner
7 Temperature selector
8 Piezo ignition
9 Power switch
10 Gas fitting
11 Pilot burner
Danger!
Carbon monoxide poisoning.
Never put the flue gas sensor out of operation.
Otherwise, in unfavourable conditions in the
chimney over a long period, flue gases may flow
back into the room where the appliance is fit-
ted.
1
2
3
4
5
6
7
INT gb
3
Tabla de contenido
loading

Tabla de contenido