Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Analogue bar-graph.
Located on the display lower left part, it analogically indicates the resistance value being measured.
High voltage light indicator
A light indicator displays the occurrence of high voltage on the output terminal during the measurement and keeps lit until the
discharging process has been completed.
Built-in chronometer
It features time indication in minutes and seconds.
Test number
Automatically indicates a number on the display, when the test is started.
Special features
Voltage selector
When * V TEST is pressed, it allows programming testing voltages.
Predetermined output voltages
500V voltage test.
1kV voltage test.
2,5kV voltage test.
5kV voltage test.
To use them it is necessary that function V TEST is actived.
Increase and decrease keys
Increase output voltage in steps of 500V.
Decrease output voltage in steps of 500V.
To use them it is necessary that function V TEST is actived.
Timer
The timer automatically starts when the test button is pressed. Test duration is one minute, when the test will be
stopped automatically.
Voltmeter
By pressing the + key, the instrument will measure the voltage effectively applied to the element being tested.
Limit (LIM)
By pressing , key the megohmmeter works like "pass-fail test" instrument. When the resistance is lesser than
100MΩ the instrument indicates with a sound signal and > / led will be blinking.
26
Capítulos
Tabla de contenido
