Velleman CAMCOLD3 Manual Del Usuario página 5

Example: Controlling the P/T of camera n° 2.
o Press 2 and the CAM key to select camera n° 2.
o Tilt the joystick to control the camera P/T or use the Z-, Z+, F- or F+ key to control the lens.
c. Setting Up the Preset
• Select a camera and set the P/T and the lens to the desired position.
• Press the F1 key and press 8.
• Define the preset number (1 – 64).
• Press PRE to confirm.
Example: Setting preset 15 to camera n° 5.
o Press 5 and then press the CAM key to select the camera.
o Move the P/T and the lens to the desired position.
o Press the F1 key.
o Press 8.
o Press 15.
o Press PRE to confirm your selection.
d. Running the Preset
• Select the desired camera number.
• Define the preset (1 - 64). The default preset is 1.
• Press the CALL key. The corresponding preset will be displayed on the screen.
Example: Setting camera n° 3 to preset 6.
o Press 3.
o Press the CAM key.
o Press 6.
o Press the CALL key.
o Preset 6 of camera n° will be displayed.
e. Pausing a Running Preset
• Select the desired camera ID (1 – 63).
• Press the HOLD key or tilt the joystick. The auto running preset will be paused.
Example: Pausing the preset of camera n° 4.
o Press 4.
o Press the CAM key.
o Press HOLD or tilt the joystick. The preset of camera 4 will be paused.
f. Setting the Auto Scan
• Make the camera turn to the left using the joystick until the desired position has been reached.
• Press 92 and press the CALL key to set the left limit auto scan.
• Make the camera turn to the right using the joystick until the desired position has been reached.
• Press 93 and press the CALL key to set the right limit auto scan.
• Press the PAN key to make the camera scan from the left to the right. When the camera reaches the appointed
position, it will pause for 2 seconds and then move repeatedly from the left to the right. To stop the auto scan, just
tilt the joystick.
CAMCOLD3
- 5 - VELLEMAN