Preventive Maintenance Instructions; Daily - Alliance Laundry Systems JT30XG Manual De Instalación, Operación, Mantenimiento Y Seguridad

Preventive Maintenance Instructions

DAILY

LINT REMOVAL (SEE FIGURE 42)
WARNING
To reduce the risk of serious injury, do not
open the lint panel while the tumbler is in
operation. Open tumbler door and allow
cylinder to completely stop before
cleaning lint screen.
1. Open the lint panel.
2. Remove all accumulated lint in the lint compartment
area. Lightly brush any lint that may be left on the lint
screen. Lint left in the lint compartment is drawn
back onto the lint screen and will restrict proper air
circulation.
3. Be sure the lint screen is not torn. If it is, replace
immediately. A torn lint screen allows lint to pass
from the tumbler to the ductwork system, thus
creating a restriction to air circulation.
THERMOSTAT
SENSING PROBE
M414670
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
SECTION VI
4. The lint screen is designed to completely cover the
5. Wipe any accumulated lint off of the thermostat
W079
6. Replace the lint panel on the tumbler, ensuring a tight
7. Keep dryer area clear and free from combustible
WARNING
Figure 42
entire opening in the lint screen hood. Be sure that it
does so. Excessive gaps between the lint screen and
the lint screen hood allows lint to pass into the
ductwork system.
sensing probe, cabinet hi-limit thermostat (if
applicable) or thermistor (micro models). Failure to
do so will allow a buildup of lint in this area to act as
an insulator and cause overheating in the tumbler.
fit and lock.
materials, gasoline, and other flammable vapors and
liquids.
LINT
SCREEN
T046IE3A
79