Troubleshooting - Sony Trinitron SSM-14N5E Manual De Instrucciones

Using On-Screen Menus
2d USER MEMORY menu
The items have the following functions.
Item
Function
STORE
To store all adjustments and
settings currently set on each
menu into the internal memory.
RECALL To recall all adjustments and
settings currently stored in the
internal memory.
FACTORY PRESET To reset the adjustments and
settings currently set on each
menu to the factory settings.
a) The current settings and adjusted values are reset to the
factory settings. The values and settings adjusted and
stored in the internal memory by using the STORE
menu, however, are not changed. To reset internally
stored adjusted values and settings to the factory setting,
select FACTORY PRESET, first, then select STORE.
The color system of the input signal is reset to AUTO
even though the factory setting on the COLOR SELECT
menu is NTSC or PAL.
When you press the ENTER (4) button, the following
message is displayed for about two seconds. The
currently selected item becomes active when pressing
the ENTER (4) button.
12

Troubleshooting

This section may help you isolate the problem. Should
the problem persist, unplug the unit and contact your
Sony dealer or local authorized Sony service facility.
Symptom
If the picture is unstable,
when the input signal from
a security camera is
switched
a)
Possible causes and
remedies
Select NTSC on the COLOR
SELECT menu when the
NTSC signal is input.
Select PAL when the PAL
signal is input.