Machine Operation; Control Board - OEM FA121M Manual De Instrucciones

5

1. CONTROL BOARD

The machine is fitted with the following controls ( Fig. 10 )
1. Timer
The timer has three positions:
" "
Is for manual operation. To start the work cycle, press "
" 0 "to shut the machine down. " Minute counter (1a)"
Turn the timer knob (1) clockwise to set the number of minutes for processing (from 0 to 30 minutes), then to start press
" " or " ", according to the model; the machine shuts down when the knob reaches the "0" position.
2. Green start-up pushbutton "
This is enabled when the timer knob (1) is on "
Press to start the machine.
3. Red shut-down pushbutton "
Press to stop the machine.
4. Green start-up pushbutton "
(if fitted)
Enabled by the position of the timer knob (1) on "
Press to start the machine.
DOUGH

MACHINE OPERATION

" 1° speed.
"
" 2° speed.
1
1
FA121M - FA121
FA181M - FA181 - FA182
FA251 - FA252 - FA381 - FA382
" or " ", according to the model; to stop the cycle, press "
" or the minute counter.
" or the minute counter.
FIG. 10
5 0.0 52/5
2
3
2
3
4
".