Quick Start; De-Activation; Setting The Clock - CASO DESIGN MCG20 Chef Manual Del Usuario

14.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quick start button in quick sequence to set the cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.

14.8 De-activation:

In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Pres the Stop button once. The cooking programme that is in use will be
stopped. Open the door of the device. The cooking programme that is in use
will be stopped.
To continue the interrupted cooking program, press the button Start/Quick
start after closing the door.
To terminate the interrupted program, press the button Stop a second time.
►
display and reset the system by pressing the button Stop.

14.9 Setting the clock

To set the clock on the device, proceed as follows:

Press the button Time/Weight. Press the button once again to switch the
oven from the 24 hour system to the 12 hour system.

Turn the control dial Time/Menu until the correct hour is displayed.
Press the Time/Weight button to save the set hour.

Turn the control dial Time/Menu until the correct minute is displayed.
Time/WeightPress the Time/Weight button to save the set time.
Please note
Before beginning a different cooking process you must delete the
Activating setup mode
Setting the hours
Setting the minutes
66