Opening / Closing Door; Activation After Selecting The Programme; Reset Programmsetting; Quick Start - CASO DESIGN IMG23 Manual Del Usuario

The following table is intended as a basis for selecting the correct cookware:
Cookware
Heat-resistant glass dishes
Non heat-resistant glass dishes
Heat-resistant ceramic dishes
Microwave-resistant plastic container
Kitchen roll
Metal sheet
Metal rack, metal container
Aluminium foil and container

14.4 Opening / closing door

 Open door
Open the door of the device. If the device is switched on, the current cooking programme will
be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow the
accumulated heat to escape.
Close doors

Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button Start/Quickstart.

14.5 Activation after selecting the programme

After selecting the program, press the button Start/Quickstart to start the preset cooking
programme.

14.6 Reset programmsetting

If needed , press

14.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance.
Press the Start/Quickstart button in quick sequence to set the cooking time (max 10
minutes). The oven starts automatically after 2 seconds.
Please note
once to reset the settings of the device.
Micro-wave Grill
 
 
 
 
 
 
 
 
Combination








66