Blind Hem Stitch; To Sew; Pintucking - Sears Kenmore 385.19233 Manual De Instrucciones

Blind hem stitch
Stitch pattern: 22
Needle thread tension: 1 to 4
(_ Presser foot G: Blind hem foot
* Stitch pattern 7 can also be used.
Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge should be
overcast first.
Fold the hem, as illustrated.
Wrong side (Bottom side) of fabric
1/4"-7/16" (0.4-0.7 cm)
(_) Light weight fabric
Heavy weight fabric
• To sew
When the needle comes to the left
When the needle comes to the right
Guide
Folded edge
There is a sliding guide screw on the blind hem foot that
allows you to precisely control where the needle pierces
the edge of the fabric fold. Adjust the screw so that at the
leftmost position of the stitch, the needle just pierces the
edge of the fold. If the needle pierces too far left, the
stitches will show on the right side of the fabric. Lower the
presser foot. Sew, guiding the folded edge along the guide
in the foot (_.
Pintucking
Stitch pattern: 01
Needle thread tension: 2 to 6
(_ Presser foot G: Blind hem foot
Place the folded fabric under the raised presser foot.
Lower the needle into the fabric 1/16" (0.1 to 0.2 cm) from
the folded edge. Lower the presser foot. Turn the screw to
adjust the guide on the blind hem foot to touch the folded
fabric edge.
f
A
®
m m
m
m
T m
22 3.5 2.0
®
I
I
I
I
I
I
I
01
®
8O