Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell MKS 165 Ec Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed while idling
Saw blade speed at normal load
Cutting depth
Maximum cutting depth 0°/30°/45°
Tilting saw unit
Saw blade diameter max/min
Saw blade body thickness
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, with parallel guide fence
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Idling 103 dB (A)
Machining 111 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable circular saw MKS 165 Ec complete with:
1 carbide-tipped circular saw blade Ø 410 mm (6 1/8 in.), 28 teeth
1 riving knife / splitter (thickness 2.5 mm / 3/32 in.)
1 hose connector
1 parallel guide fence
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
230 V~, 50 Hz
2800 W
15.2 A
1500 - 1800 min
1400 - 1700 min
85 - 165 mm
143/116.5/82.5 mm
up to 60°
410/377 mm
2.5 mm (0.098 in.)
4.2 mm
30 mm (1.18 in.)
58 mm (2.28 in.)
15.3 kg (9.0 lbs)
460 x 710 x 450 mm
Workplace-related emission value
92 dB (A)
100 dB (A)
.
2
-17-
120 V~, 60 Hz
2500 W
23.5 A
-1
-1