Maintenance; Charger And Battery; Technical Data; Battery Charger - Gesipa AccuBird Pro Instrucciones De Manejo

GB
1.9

Maintenance

The maintenance of the blind riveting tool is limited to the complete claw mechanism and the
associated wearing parts:
• Remove battery (n° 47) from the blind riveting tool.
 U nscrewthehead(partn°5)usingflatwrenchSW14orSW24andclean.Lookfor
•
deposits in the top of the head!
Unscrewthejawhousing(n°7)using2SW17flatwrenches.
•
• Take out the jaws (n° 8) and jaw pusher (n° 9), clean them and lubricate or grease the
sliding surfaces; replace the jaws (n° 8) if worn (blunt teeth!).
• Re-assemble in reverse order ensuring that all parts are tightened! We recommend that
you secure the screw connection using a thread adhesive (such as Loctite 222 or Loctite
243).
Regular maintenance will extend the service life of your high-quality GESIPA
and they should be serviced at least every 2 years by an authorised workshop or by
®
GESIPA Service. For tools that are used intensively, we recommend servicing ahead of
schedule.
2.

Charger and battery

2.1

Technical data

2.1.1 Battery charger

Input voltage:
Output voltage:
Output current:
Weight:

2.1.2 Battery

Nominal voltage:
Number of cells:
Cell/capacity:
Weight:
24
100 V-240 V~/50-60 Hz
21 VDC
2.5 A
0.6 kg
18.0 V
5
Li-Ion; 2.1 Ah
Approx. 0.42 kg
® tools