HumanTechnik signolux Instrucciones De Servicio página 14

Setting the melody
You can choose the melody / sound
effect for each symbol:
a) First trigger a signal (e.g. operate
the doorbell pushbutton).
b) The symbol assigned to the trans-
mitter should light up and the pre-
viously chosen melody should be
heard.
c) Press and hold the melody setting
button for 2 seconds. The symbol
starts to blink.
d) Repeatedly press the melody
setting button » « until you have
found the desired melody / sound ef-
fect (you can choose from 15 different
sounds).
e) Once the symbol ceases to flash,
the selected melody has been assi-
gned.
English 14
Meaning of the symbols
Each symbol can be assigned to a
transmitter (e.g. the doorbell-push-
button) and can be reprogrammed as
preferred.
The symbols stand for:
Doorbell 1
Doorbell 2
Telephone
Person call
Baby
Fire alarm
Water alarm
Alarm
Transmitter battery status indicator:
The receiver alarm clock informs
about the state of the batteries within
the signolux transmitters. The red sta-
tus LED is located in the upper quar-
ter of the flash lens.
A low battery level of a transmitter is
indicated by the red control lamp shi-
ning together with the symbol of the
according transmitter when it's signal
is triggered.
Please replace the batteries of the
according transmitter as soon as pos-
sible.
green light
green light
orange light
yellow light
white light
red light
blue light
red light