First Use; Measuring Conditions; General Functions - Velleman VTLD100 Manual Del Usuario

Medidor de distanciacon láser de alta precisión
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

e
increase/add button
LCD
1
laser ON
2
reference level top
3
reference level bottom
4
measuring function
area
volume
1
indirect measurement
st
2
indirect measurement
nd

6. First use

Before using the device, you need to stick the laser warning (included in the
package) on the device:
Refer to the safety instructions above before using the device.
Make sure the device does not contain any batteries.
The sticker is available in various languages. Put the sticker in your
language on the device.
When done, insert batteries (see section Battery below).

7. Measuring conditions

Measuring range
The measuring range is limited to 50m.
In dark environments or at night this range may increase.
In very light environments or when a surface has very poor reflective
properties, use a target plate.
Target surfaces
Measuring errors will occur when pointing at colourless liquids (e.g.
water) or glass, Styrofoam or similar semi-transparent surfaces.
Aiming at very shiny objects will deflect the laser beam which will lead
to errors.
Measuring towards non-reflective dark surfaces may increase the
measuring time.
Do not aim the meter directly into the sun or other bright light source.

8. General functions

Refer to the illustrations on pages 2 and 3 of this manual.
Make sure batteries are present inside the device (see section Battery
below).
V. 02 – 26/11/2013
VTLD100
j
clear/OFF button
5
single mode
6
battery status
7
memory address
8
device error
9
max./min. indication
10 first value + unit
11 second value + unit
12 last measurement or
calculation result
6
©Velleman nv
Tabla de contenido
loading

Tabla de contenido