Setting End Backtacking (856A, 855A-A0 [ ] Only) - Brother ZE-855A Manual De Instrucciones

7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES

7-7. Setting end backtacking (856A, 855A-A0 [ ] only)

After the treadle has been depressed backward, you can sew a set number of stitches to create end backtack stitches.
1349M
t y
u
Number of Number of
stitches for stitches for
section C section D
I Turning the end backtack function on and off
The condition changes as shown below each time the end backtack key e is pressed.
•
End backtacking is carried out when the end backtack indicator r is illuminated.
•
Zigzag width display, etc.
I End backtack sewing speed
The sewing machine operates at a speed of 1,200 rpm when sewing end backtack stitches.
I Changing the setting
The DIP switch settings can be used to change the zigzag width for end backtack stitches. (Refer to page 106.)
105
<Example>
q
w
<When the condense dial is set to
a "-" (minus) value>
(6 stitches)
r e
1459M
r
e
Number of end backtack
stitches
1492M
1456M
The stitch length for section C is
adjusted by means of the condense
dial q, and the stitch length for
section D is adjusted by means of
the feed adjustment dial w.
(6 stitches)
(2 stitches)
(2 stitches)
1457M
1. Press the end backtack key e.
• The indicator r will illuminate and the end
backtacking function will turn on.
• The CD indicator t will illuminate and the number
of end backtack stitches will appear in the LED dis-
play y. (For example,
section C and 2 stitches for section D.)
selection keys u to change the number
2. Use the
of end backtack stitches.
3. Carry out sewing. When the treadle is depressed back-
ward, the end backtack stitches will be sewn. (For the
856A, the thread will then be trimmed.)
Note:
• The sewing machine will continue operating until the
set number of end backtack stitches has been sewn,
even if the treadle is returned to the neutral position.
• The set number of end backtack stitches will be sewn
regardless of the zigzag stop position setting.
Illuminated
1460M
ZE-855A,856A
<When number of stitches
for section D is "00">
(6 stitches)
AA AA indicates 6 stitches for
Off
Zigzag width display
1458M
1493M