Receiving A Call While Talking - Sony IT-M704 Manual De Instrucciones

Receiving calls (continued)
Notes
• When another phone connected to line is in use, the line button flashes
slowly.
• If a call is put on hold for more than about three minutes, you will hear an
alarm.
Using Do Not Disturb
You can turn off the outside call and intercom call ringing of all the
lines and voice from the speaker during a Page and an All Page using
this function. However, when a call comes in, "** RINGING **" will
be displayed even if this function is activated.
Making calls is available even if this function is activated.
While the phone is not in use or the phone is ringing, you can press
(DO NOT DISTURB).
The DO NOT DISTURB lamp lights up.
To cancel this function, press (DO NOT DISTURB) again.
Note
An outside call cannot be transferred to the phone with the "DO NOT
DISTURB" function activated.

Receiving a call while talking

If another call comes in while talking on the other line, the
corresponding line button will flash and two beeps will be heard from
the speaker.
Example: Receiving a call on line 2 while talking on line 1
1
Press (HOLD).
Line 1 is put on hold and the LINE 1 button flashes slowly.
2
Press (LINE 2).
Now you can talk to the other caller on line 2.
To disconnect line 2, press (LINE 1).
Note
If you do not press (HOLD) in step 1, line 1 will be disconnected.
To talk with two parties at the same time using both line 1 and line 2,
see "Having a three-way conference call" on page 34.
30 US
Basics