Sony IT-M704 Manual De Instrucciones página 29

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Receiving calls when the headset is connected
When the TL-HD1 headset (not supplied) is connected to the I
(HEADSET) jack, you can talk through the headset.
1
When you hear the phone ring, press
(SPEAKERPHONE) (HEADSET).
The SPEAKERPHONE lamp lights up.
2
When you're done talking, press
(SPEAKERPHONE) (HEADSET).
The SPEAKERPHONE lamp goes off.
Note
If the headset is not connected, you will receive a call
through the speakerphone in step 1.
Additional tasks
To
Adjust the handset or
headset volume
Adjust the speaker volume
Put a call on hold
Adjust the ringer volume
Mute your voice
Switch to another call on
("call waiting" service*)
* You need to subscribe to the service from your telephone company.
Do this
During phone conversation, press (VOLUME)
(+) or (--). Each press of (VOLUME)(+) or (--)
switches the handset or headset volume
between "HIGH", "MID" (middle) and "LOW".
During speakerphone conversation, press
(VOLUME)(+) or (--). Each press of
(VOLUME)(+) or (--) switches the speaker
volume by one of 16 levels.
Press (HOLD). The line button on which a call is
put on hold will flash.
Press (LINE 1), (LINE 2), (LINE 3) or (LINE 4)
that is flashing to resume the conversation.
The corresponding line button can be pressed
on every phone.
Press (PROGRAM). Press b(*) or (#)B up
until "RING VOLUME" appears on the
display, and then press (PROGRAM). Press
b(*) or (#)B to choose "HIGH", "MID"
(middle), "LOW" or "OFF", and then press
(PROGRAM). You will hear (monitor) the phone
ring with the adjusted level. While the phone is
ringing, you can adjust the ringer volume by
pressing (VOLUME)(+) or (--), however, the
ringer volume cannot be set to "OFF".
Press (MUTING) to disable the microphone. The
MUTING lamp lights up. Press (MUTING) again
to cancel.
Press (FLASH).
Press (FLASH) again to return to the first caller.
I
HANDSET
continued
continued
29
Basics
US
Tabla de contenido

Solución de problemas

loading

Tabla de contenido