Sony IT-M704 Manual De Instrucciones página 15

Choose the dialing mode
For the telephone to work properly, select an appropriate dialing
mode (tone or pulse).
When other phones (IT-M704 or IT-M804) are connected to the LINE 1
jack, the same dialing mode is automatically set to all the phones. Be
sure to connect the phones beforehand, and set the dialing mode.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• The dialing mode cannot be set for every line.
If you aren't sure of your dialing system
Make a trial call with the dialing mode set to "TONE".
If the call connects, leave the setting as is; otherwise, set to "PULSE".
1
Press (PROGRAM).
2
Press b(*) or (#)B until
"DIAL MODE" appears on the
display.
3
Press (PROGRAM).
TONE PULSE
4
Press b(*) or (#)B to choose
the dialing mode ("TONE" or
"PULSE"), and then press
(PROGRAM).
You will hear a long
confirmation beep.
continued
US
15
Getting Started