Explanation Of General View - Makita UC120D Manual De Instrucciones

Ocultar thumbs Ver también para UC120D:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
ENGLISH
(Original instructions)
1
Battery cartridge
2
Button
3
Switch trigger
4
Lock-off button
5
Screw
6
Sprocket guard
7
Hex socket head bolt
8
Hex wrench
SPECIFICATIONS
Model
Chain speed per minute (min
Length of guide bar ............................................. 115 mm
Saw chain
Type .................................................................... 25 AP
Pitch ........................................................................1/4"
No. of drive links ....................................................... 42
Overall length ...................................................... 468 mm
Net weight .............................................................. 2.1 kg
Rated voltage ....................................................D.C. 12 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for cutting branches.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS CHAIN SAW SAFETY WARNINGS:
1.
Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2.
Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
hand configuration increases the risk of personal
injury and should never be done.
3.
Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.

Explanation of general view

9
Guide bar
10 Cutter
11 Sprocket
12 Saw chain tension adjusting
spring
13 Concave portion of guide bar
14 Chain oil
15 Saw chain
UC120D
-1
)...................... 160 m/min.
ENE031-2
GEA010-1
GEB039-2
16 Tip guide
17 Lower guide
18 Scabbard (chain cover)
19 Battery cover
20 Screwdriver
4.
Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs
and feet is recommended. Adequate protective
clothing will reduce personal injury by flying debris
or accidental contact with the saw chain.
5.
Do not operate a chain saw in a tree. Operation of
a chain saw while up in a tree may result in personal
injury.
6.
Always keep proper footing and operate the
chain saw only when standing on fixed, secure
and level surface. Slippery or unstable surfaces
such as ladders may cause a loss of balance or con-
trol of the chain saw.
7.
When cutting a limb that is under tension be
alert for spring back. When the tension in the wood
fibres is released the spring loaded limb may strike
the operator and/or throw the chain saw out of con-
trol.
8.
Use extreme caution when cutting brush and
saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off bal-
ance.
9.
Carry the chain saw by the front handle with the
chain saw switched off and away from your body.
When transporting or storing the chain saw
always fit the guide bar cover. Proper handling of
the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
10. Follow instructions for lubricating, chain ten-
sioning and changing accessories. Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
11. Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
12. Cut wood only. Do not use chain saw for pur-
poses not intended. For example: do not use
chain saw for cutting plastic, masonry or non-
wood building materials. Use of the chain saw for
operations different than intended could result in a
hazardous situation.
9
Tabla de contenido
loading

Tabla de contenido