General Outline; Manual Manoeuvre - BFT STOPPY Instrucciones De Uso

ENGLISH
Thank you for buying this product, our company is sure that you will be more
than satisfied with its performance.This product is supplied with a "Warnings"
leaflet and an "Instruction Manual". These should both be read carefully as
they provide important information about safety, installation, operation and
maintenance. This product complies with recognised technical standards
and safety regulations. We declare that it is in conformity with the following
European Directives: 89/336/EEC, 73/23/EEC, 98/37/EEC (and subsequent
amendments).

1) GENERAL OUTLINE

Underground anti-waiting bollard, compact and sturdy.
It consists of a steel rod coated with reflecting material, and powered by
an oil-bath motor; all protected by a hot-galvanised steel cylinder which is
fitted underground.
The PERSEO control panel allows up to four bollards to be controlled
simultaneously.
Besides the standard version, STOPPY is available in the following models:
"L" series provided with signal indication blinker lights and, on request, "R"
series provided with a heated resistor which also allows the bollard to be
used in particularly cold climates (as much as –25°C) and "A" series provided
with a magnetic sensor for connection to an antitheft system.
Accessories:
Electric brake buffer battery kit, which allows the bollard to be kept in the
access closed position even when the mains power is off.
2) SAFETY
If correctly installed and used, this automation device satisfies the required
safety level standards. However, it is advisable to observe some practical
rules in order to avoid accidental problems.
Before using the automation device, carefully read the operation instructions
and keep them for future reference.
• Keep children, persons and things outside the automation working range,
particularly during operation.
• Keep radio controls or other control devices out of children's reach, in
order to avoid any unintentional automation activation.
• Do not intentionally oppose the rod movement.
• Do not modify the automation components.
• In case of malfunction, activate the cut-out switches to disconnect the
power supply, batteries included, in order to gain access to the automa-
tion device, and request the assistance of a qualified person (installer).
• Before proceeding to any external cleaning operation, activate the cut-
out switches to disconnect the mains powers supply and the batteries, if
provided.
• Keep the photocell optical components and light signal devices clean.
Check that none of the safety devices (photocells) are obscured by
branches or shrubs.
• For any direct assistance to the automation system, request the help of
a qualified person (installer).
• Have qualified personnel inspect the automation system once a year.

3) MANUAL MANOEUVRE

When the power supply is disconnected, the bollard tends to lower sponta-
neously, therefore carrying out an opening manoeuvre; a simple pressure
exerted on the top of the cylinder surface will complete lowering, and vehicle
transit will be allowed. See fig. 1.
N.B. opening means bollard lowered (transit allowed), closing means
bollard raised (transit not allowed)
In the case of bollards provided with buffer batteries, before proceeding to
manual manoeuvre, disconnect the emergency power supply by means of
the appropriate switch fitted by the installer.
4) MAINTENANCE AND SCRAPPING
System maintenance is to be regularly carried out by qualified personnel.
The materials making up the appliance and its packing are to be scrapped
according to current standards. Batteries must be disposed of in the ap-
propriate manner.
WARNING
Correct operation of the controller is only guaranteed when the data
specified in this manual are respected,as well as good technical practice
standards. The Company cannot be held responsible for any damage
caused by failure to observe the installation standards, good technical
practice standards and directives specified in the present manual.
4 -
STOPPY - Ver. 05
USER'S MANUAL
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product at any time, while leaving the essential
product features unchanged.
Fig. 1