Technical Data; Function Of The Unit; Overview (A); Start Of Operation - Rothenberger RODIACUT 400 PRO Instrucciones De Uso

2

Technical Data

Dimensions (LxWxH) .................................. 460 x 305 x 1150 mm
Drill stroke max ........................................... 680 mm
Drill diameter max ....................................... ø 400mm (optional ø 500mm)
Sloping support ........................................... yes
Weight ca. .................................................. 28 kg
Dowel depth extent ..................................... 350 mm
3

Function of the Unit

3.1 Overview
Base plate
1
Drill column
2
feed unit
3
Advance lever
4
Hexagon nut
5
Eye bolts
6
As the system consists of coordinated components, please only use original ROTHENBERGER
spare parts, accessories and diamond drill bits in order to enable optimum efficiency of the
equipment at all times.
3.2

Start of operation

Positioning:
Please pay attention to the position of the ring bolts (6)! Ring bolts must not over-
lap the lower edge of the base plate!
 Measure borehole and mark the centre. See technical data for extent of dowel depth.
 Adjust and fasten base plate (1).
The respective optimum fastening possibility depends on the building site conditions. (see fas-
tening possibilities, item 3.3)
You can achieve the final fine alignment or adjustment of the drill rig by tightening the four ring
bolts (6).
Every time before start of operation make sure that the drill rig is firmly fas-
tened and not able to shake!
3.3 Fastening possibilities
Dowel fastening on concrete or brickwork (picture B-1)
 Measure and drill a mounting hole for the dowel fastening. See technical data for extent of
dowel depth!
Concrete (Item no. FF35120)
Brickwork (Item no. FF35121)
 Carefully clean the drill dust from the borehole.
 Apply the concrete dowel with expansion wedge or brickwork dowel (can be re-used up to 5
times).
Concrete set: Turn the diamond knurl threaded bar into the dowel, attach the drill rig and
fasten using the U-washer and nut.
12
Fine feed 1:3
7
Hand grip
8
Strut head (optional)
9
Magnetic depth stop
10
Feeder locking device
11
Rocking clamp lever
12
Diameter in mm
15 mm
20 mm
ENGLISH
Depth in mm
65 mm
85 mm
(A)
(B)