Cleaning And Maintenance - cecotec CONGA 899 SLIM Manual De Instrucciones

• You have to configure the timer day by day. Repeat the procedure in points 2.2 to 2.5, for the
days you require.
• Once the desired times and days have been set, press
on the display, and the appliance will start cleaning at the selected time.
IMPORTANT: In order to start cleaning at the appointed times automatically, the robot must be
charged and turned on "I".
CANCEL THE TIMER
• Press the button and search the day of the week you want to erase with
• Once found, press the
it is so, it has been erased.
• Repeat this procedure to erase the desired days.
• To exit the timer mode, press
display.
NOTE: After changing the batteries con the remote control, you will have to set both the time and the
timer again.

5. CLEANING AND MAINTENANCE

CLEANING OF SIDE BRUSHES
Please clean the side brushes when they become dirty; if a side brush is damaged, please
replace it.
TIPS: Both side brushes are identical and can be directly replaced without considering the
correspondence.
CLEANING OF DUST BIN AND FILTERS
Please clean the dust bin and filters immediately after use, as shown below:
button for 3 seconds. Check that the time on the display is 00:00. If
again. Check that the erased days are no longer on the
to exit. The chosen days will appear
CONGA 899 SLIM
ENGLISH
.
23