Standby Mode; Power Off - cecotec CONGA 899 SLIM Manual De Instrucciones

ENGLISH
POWER ON
• Turn on the switch at the side of the cleaner.
WARNING: the vacuum cleaner robot is equipped with an ON/OFF switch on its main body. As
a safety system, if the robot is switched OFF, all preset values will be restored. If you want the
vacuum cleaner robot to be programmed at a specific time, the switch must always be ON,
otherwise, you would need to program the cleaner again from the remote control.
POWER ON/STANDBY/HIBERNATION/POWER OFF
POWER ON
• Make sure that the power switch at the bottom of the machine is turned on.
• Press the button on the machine or the remote control to start the machine.

STANDBY MODE

• Press the button to enter this mode while in cleaning mode.
• Hold the button for 3 s to enter this mode while in hibernation mode.
HIBERNATION MODE
• Hold the button of the machine for 3 s.
• The machine will automatically enter this mode, if there is no operation for 30 s.

POWER OFF

• Turn the power switch at the bottom off (O is used for "turn off"; 1 is used for "turn on"; the
preset position of the product is O).
REMOTE CONTROL
Start cleaning
• The appliance will start cleaning when the
remote control is pressed.
20 CONGA 899 SLIM
* In order to charge the appliance, keep the switch on ("I" on). This way
the battery will be fully charged for the next use.
"I" on, "O" off
button in the control panel or on the