Redmond RMC-M150A Manual De Usuario página 22

VII. BEFORE CONTACTING A SERVICE CENTER
Error code
System error. Possible control board or temperature
Е1–Е3
sensor failure.
Problem
The appliance does not switch
Voltage supply failure.
on.
Voltage supply interruption.
The bowl is installed with a distortion.
The meal is taking too long
There is a foreign object between the bowl and the
to cook.
heating element.
The heating element is dirty.
The packaging, user manual, and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection point for
the recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
22
Error description
Unplug the appliance and let it cool down. Close the lid. If this does not eliminate the
error, contact an authorized service center.
Possible Cause
Check the voltage supply.
Check the voltage supply.
Install the bowl properly.
Remove the foreign object.
Unplug the device and let it cool down. Clean the heating element.
Error handling
Solving the problem