Important Electrical Information - WAGNER MICRO HEAT TOOL Manual Del Propietário

Important Safety Information • Read all safety information
before operating the equipment. SAVE THESE INSTRUCTIONS
WARNING!
Some dust, peelings, residue, and vapors caused by paint removal activities contain
chemicals known to the state of California to cause birth defects or other reproductive
harm. An example of a chemical would be lead from lead-based paints (do not use
a heat tool to remove lead-based paint). Your risk from exposure varies, depending
on how often you do this type of work. To reduce your exposure to these chemicals:
work in a ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
For more information, go to www.P65warnings.ca.gov

IMPORTANT ELECTRICAL INFORMATION

Use only an extension cord that will accept the plug on the product. Make sure your extension
cord is in good condition. When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Cord shall be 14 AWG minimum for general indoor
use.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug (put it in the other way). If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
6
EN
SAVE THESE INSTRUCTIONS