Always check Interlock System after servicing the electrical system!
Wire Harness Label
Schematic Code
Relay
Description
KYA / K2
Key Switch "A"
KYI / K1
Key Switch "I"
KYS / K3
Key Switch "S"
BK1 / K4
Brake -Start
BK2 / K5
Brake-Run
NT1 / K6
Neutral-Start
NT2 / K7
Neutral-Run
NT3 / K8
Neutral-Cruise
ML / K9
Mow -Left
Deck
MC / K10
Mow-Center
Deck
MR / K11
Mow-RIght
Deck
CRS / K12
Cruise Control
4WD / K13
Four Wheel
Drive
LTS
Lights
K15
Run Circuit
Cutout
K16
Auxilliary
K17
Ignition
K15 K16 K17
K15
K16
K17
MR MC ML NT3 NT2 NT1 BK2 BK1 KYS KYA KYI
K11
K10
K9
K8
Function
Holds fuel stop solenoid valve open when ignition switch is in the RUN position and opera-
tor is seated.
Activates glow plug timer if engine isn't running.
Opens fuel stop solenoid valve when ignition switch is in the START position, power take-
off switch is OFF, parking brake and neutral switches are closed.
Cranks starter motor when ignition switch is in the START position, power take-off switch is
OFF, parking brake and neutral switches are closed.
Part of starting circuit. Relay closes when parking brake is engaged.
Disconnects power to cruise control relay (CRS) with parking brake engaged.
Disconnects power to the fuel valve when the operator leaves seat with parking brake dis-
engaged.
Part of starting circuit. Relay closes when traction pedal is in neutral.
Disconnects power to the fuel stop solenoid valve when operator leaves seat with neutral
switch still open (traction pedal pressed).
Disconnects power to cruise control when neutral switch is closed (traction pedal in neu-
tral).
Energizes solenoid to left side deck valve when deck is lowered and power take-off switch
is ON.
Energizes solenoid to front deck valve when deck is lowered and power take-off switch is
ON.
Energizes solenoid to right side deck valve when deck is lowered and power take-off switch
is ON.
Activates cruise control when cruise control switch is closed, traction pedal is pressed and
parking brake is disengaged.
Energizes solenoid to four wheel drive valve when four wheel drive switch on instrument
panel and forward sensing switch on traction pump are closed.
Included with light harness kit 5003564. Controls operation of lights.
Disables run circuit when keyswitch is turned to START position.
Provides power to ignition circuit with keyswitch in RUN position. Disables ignition circuit in
START position
Provides power to gauges, mow circuit, 4WD circuit and seat switch circuit
LTS 4WD CRS
K13
K12
K7
K6
K5
K4
K3
K2
K1
MAINTENANCE
4
GB-25