Scope Of Delivery; Safety; Explanation Of Symbols; Intended Use - WIKA CTD4000 Manual De Instrucciones

2. Short overview / 3. Safety

2.3 Scope of delivery

For model CTD4000-140 temperature dry-well calibrator
Calibrator
■
Power cord, 1.5 m [5 ft] with safety plug
■
EN
Replacement tool
■
Operating instructions
■
Drilled insert with 4 bores: 3.3 mm, 4.8 mm and
■
2 x 6.4 mm [0.13 in, 0.19 in and 2 x 0.25 in]
For model CTD4000-375 temperature dry-well calibrator
Calibrator
■
Power cord, 1.5 m [5 ft] with safety plug
■
Replacement tool
■
Operating instructions
■
Drilled insert with 4 bores: 3.2 mm, 4.8 mm, 6.4 mm and
■
11.1 mm [0.13 in, 0.19 in, 0.25 in and 0.44 in]

3. Safety

3.1 Explanation of symbols

WARNING!
... indicates a potentially dangerous situation
that can result in serious injury or death, if not
avoided.
CAUTION!
... indicates a potentially dangerous situation that
can result in light injuries or damage to property
or the environment, if not avoided.
DANGER!
... identifies hazards caused by electric power.
Should the safety instructions not be observed,
there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation that
can result in burns, caused by hot surfaces or
liquids, if not avoided.
Information
... points out useful tips, recommendations
and information for efficient and trouble-free
operation.
6
For model CTD4000-650 temperature dry-well calibrator
Calibrator
■
Power cord, 1.5 m [5 ft] with safety plug
■
Replacement tool
■
Operating instructions
■
Drilled insert with 4 bores: 3.2 mm, 5 mm, 7 mm and
■
10.5 mm [0.13 in, 0.2 in, 0.28 in and 0.41 in]
Cross-check scope of delivery with delivery note.

3.2 Intended use

The model CTD4000 portable temperature dry-well calibrator
is a portable unit that has been designed for on-site
applications as well as for the harsh conditions of the naval
and marine sectors.
The temperature dry-well calibrator is intended for the
calibration of thermometers, temperature switched/
thermostats, resistance thermometers and thermocouples.
The operational safety of the delivered instruments is only
assured if the equipment is employed for its intended use
(verification of temperature sensors). The given limit values
should never be exceeded (see chapter 12 "Specifications").
Maximum ambient conditions at place of use:
Ambient temperature: 5 ... 45 °C [41 ... 113 °F]
■
Humidity: 95 % relative humidity (non-condensing)
■
This instrument is not permitted to be used in hazardous
areas!
Notes for instruments with EMC and class A
This is class A equipment for emissions and is intended
for use in industrial environments. In other environments,
e.g. residential or commercial installations, it can interfere
with other equipment under certain conditions. In such
circumstances the operator is expected to take the
appropriate measures.
WIKA operating instructions, model CTD4000