Maintenance By The Service; Disposal At End- Of-Life - Mocom Millwashing Manual Del Operador

MAINTENANCE BY
THE SERVICE
DISPOSAL AT END-
OF-LIFE
To ensure the perfect operation of the pumps dosing the chemical products, it is
recommended to have them maintained every three months.
Every 12 months
Request a general maintenance that will include among other things:
-
Cleaning and if necessary replacement of the internal filters;
-
Cleaning and if necessary replacement of the electromagnetic valve's
membranes;
-
Cleaning of the pump to ensure its perfect rotation;
-
Control and if necessary cleaning of the thermostat's probes;
-
Replacement of the dosage pump's membrane.
T
HIS GENERAL MAINTENANCE IS NECESSARY ALSO FOR INSTALLATION USING
SOFT WATERS
FACILITATES THE DEPOSIT OF SCALE
OBSTRUCTION OF THE NOZZLES SO AFFECTING THE WASHING AND THE
ACHIEVEMENT OF THE DISINFECTION TEMPERATURE IN THE TANK
In accordance with Directives 2002/95/ EC, 2002/96/ EC and 2003/108/ EC, regarding
the reduction in use of dangerous substances in electrical and electronic equipment, as
well as waste disposal, such equipment may not be disposed of as normal urban waste
and must be separated accordingly. When purchasing a new, equivalent piece of
equipment, the old piece of equipment that has reached its end-of-life must be handed
over to the reseller for proper disposal. As regards reuse, recycling and other forms of
recovery of the above mentioned waste, the manufacturer carries out the functions
defined in the individual national legislations.
The proper collection and separation of such equipment for recycling, treatment and
disposal helps avoid any possible negative effects on the environment and health and
facilitates the recycling of the materials of which the equipment is made. The crossed
out rubbish can symbol indicates that the product, at the end-of-life, must be collected
separately from other types of waste.
WARNING!
Improper disposal of the product results in the application of sanctions which
are defined by individual national laws.
NOTE
; T
HE HIGH WATER TEMPERATURE INSIDE THE MACHINE
ON THE HEATING RESISTORS AND THE
.
23