Regenerating The Water Softener - Mocom Millwashing Manual Del Operador

Regenerating the
water softener
22
When the display shows the message "SALT LOAD" or "CLN" it is necessary to load
salt into the unit; proceed as follows:
-
Open the washing compartment door.
-
Unscrew the plastic cap of the salt container placed inside.
-
Pour about 0.5Kg of common kitchen salt into the container using the funnel
provided.
DO NOT POUR SALT OUTSIDE THE CONTAINER.
-
Screw the plastic cap back.
-
Carry out a normal load of material to be washed and start a normal cycle.
The unit will automatically perform the regeneration of the water softener.
T
HE FIRST WASHING CYCLE STARTED AFTER THE REGENERATION IS LONGER AND
APPARENTLY PRESENTS AN INITIAL IDLE STAGE DURING WHICH THE UNIT
PERFORMS THE REGENERATION PROCESS
SHOWS THE MESSAGE
WARNING
NOTE
. D
URING THIS PHASE THE DISPLAY
"REG".