3M Attest 490 Manual Del Usuario página 13

Using the BI History Page
To view or print an individual record, click on the ID number of the desired record to
navigate to the Results Detail page for that BI.
Status
ID Well# Start Time
History
1 #3 2017-09-16 08:30:38
2 #9 2017-09-16 07:19:47
3 #2 2017-09-16 07:08:18
4 #1 2017-09-16 07:07:53
5 #10 2017-09-16 07:05:11
6 #9 2017-09-16 06:47:08
7 #10 2017-09-16 06:40:54
8 #2 2017-09-16 06:39:49
9 #1 2017-09-16 06:39:05
10 #10 2017-09-16 07:32:00
11 #9 2017-09-16 07:23:37
12 #10 2017-09-16 07:20:24
Using the Configuration Page
Certain set‑up and configuration options are available on the password protected 3M™ Attest™ Auto‑reader 490 Web App Configuration page. Ideally, the 3M™ Attest™ Auto‑reader
490 should be empty (i.e. have no incubating BIs) when it is reconfigured. Navigate to the Configuration page by entering either:
1) http://attestxxxxxx/protect/config.htm (where xxxxxx is the 6‑digit unit serial number), or
2) http:// xxx.xxx.xxx.xxx/protect/config.htm (where xxx.xxx.xxx.xxx is the IP address) in the web browser address bar and pressing Go or enter. A security screen will appear. Fill in the
editable fields as follows:
User name: manager
Password: Attest
and press OK.
12
Note 1: Column 1, "ID" is the assigned ID number with ID 1 representing the newest
record and ID 100 representing the oldest record. To help find a particular record, all
columns are sortable, simply click once on the column heading to sort in ascending order
3M™ Attest™ Auto-reader
and click a second time to reverse the order.
Result
Note 2: The History page refreshes less frequently than the Status page. Until the BI result
...
– is available, the History page displays ••• in the Results column indicating incubation is
–
still in‑process.
+
+
–
+
–
+
–
–
+