Hama RC200 Instrucciones De Uso página 6

Display (6)
Display flashing
Display steady (not flashing)
Display steady (not flashing)
Not displayed
• Press and hold the °C/°F/WAVE button (10) for approx. 3 seconds to start a manual search for the DCF
radio signal.
Note – Time settings
• If, during initial setup of the device, no DCF radio signal is received within the first few minutes, the
search is aborted. The radio icon (6) will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight, since interference is
generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at another location or you can
manually set the time and date.
• The clock automatically continues to search for the DCF signal every hour. If the signal is received
successfully, the manually set time and date are overwritten.
Note – Manual search
• The manual search is automatically aborted after 3-5 minutes.
• Using the wave °C/°F/WAVE (10) frequently will drain the battery. We recommend only using this
function to seek out an optimal location for the device.
/
Searching for the DCF signal
Active
Successful - signal reception
Successful – weak signal reception
Inactive – no signal reception
5