Ottobock Myo Plus Instrucciones De Uso página 20

CAUTION
Mechanical loads
Injury due to faulty control or malfunction of the product.
► Watch for loosened electrode domes.
► Do not subject the product to mechanical vibrations or impacts.
► Check the product and its housing for visible damage before each use (e.g., cracking or
breakage). Should the product be damaged or not function properly, please contact your
O&P professional immediately.
CAUTION
Changing terminal devices when switched on
Injury due to faulty control or malfunction of the product.
► Power down the product by pushing the button in the charging receptacle before changing
terminal devices.
CAUTION
Proximity to sources of strong magnetic or electrical interference (e.g. theft prevention
systems, metal detectors)
Injury due to unexpected behaviour of the product caused by interference with internal data
communication.
Avoid remaining in the vicinity of visible or concealed theft prevention systems at the
►
entrance/exit of stores, metal detectors/body scanners for persons (e.g. in airports) or other
sources of strong magnetic and electrical interference (e.g. high-voltage lines, transmitters,
transformer stations, computer tomographs, magnetic resonance tomographs, etc.).
► When walking through theft prevention systems, body scanners or metal detectors, watch
for unexpected behaviour of the product.
CAUTION
Insufficient skin contact of the electrodes
Injury due to faulty control or malfunction of the product.
The electrodes are to be placed on intact skin only and with as much electrode-skin contact
►
as possible.
► Make sure that skin contact of the electrodes continues to be given when carrying heavy
loads.
► Make sure that skin contact of the electrodes continues to be given when the residual limb
volume changes.
CAUTION
Use of damaged electrodes
Injury due to unexpected product behaviour as a result of a malfunction.
► Switch off the system and contact your O&P professional.
CAUTION
Remaining in areas outside the allowable temperature range
Injury due to faulty control or malfunction of the product.
► Avoid remaining in areas outside the allowable temperature range (see Page 25).
20