Seam Guide Lines; Turning A Square Corner - ALFA COMPAKT 100 Manual De Instrucciones

Seam Guide Lines

The numbers on the needle plate indicate the
distance between the center needle position and the
guideline.
The numbers in back are fractions of an inch.
The lines are 1/8" (0.3 cm) apart, and are engraved at
3/8˝, 4/8˝, 5/8. and 6/8˝.
w
q
The numbers in front are millimeters.
The lines are 5 mm apart, and are engraved at
e
10 mm, 15 mm and 20 mm.

Turning a Square Corner

To turn a square corner 5/8" (1.6 cm) from the fabric
edge.
Stop stitching and lower the needle by turning the
handwheel counterclockwise.
Raise the presser foot and turn the fabric to line the
edge with the 5/8. (1.6 cm) seam guide.
Lower the presser foot and begin stitching in the new
direction.
q
26
q Center needle position
w Guide lines
e Numbers
q Cornering guide