System Settings; Spotlight / Derby Light Configuration; For Dmx Mode With 27 Channels; Disabling The Wireless Footswitch - IMG STAGELINE FXBAR-5SET Manual De Instrucciones

6 System Settings

The following system settings can be changed
via menu item :
6.1 Spotlight / Derby light
configuration

for DMX mode with 27 channels

It is not necessary to change the setting for
the spotlight /derby light configuration
unless the arrangement of lights has been
changed and DMX control of the FXBAR-5SET
with 27 channels is desired .
The controller will automatically recognize
which spotlight/derby light (
connected to which jack (
send the control signals to the corresponding
jacks . The number can be found on the rear
of the light and in the figure on page 12 .
For the 27-channel mode, this means:
light number
➊
➋
➌
➍
If the arrangement of the spotlights /derby
lights has not been changed, the controls for
the lights on the light controller will be in
the same order as the lights at the controller:
1 2
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
STANDBY FUNC MODE
FIXTURE MOVEMENT CUE OVERRIDE CENTER PROGRAM TAP
STAND-ALONE 1
INSERT STAND-ALONE
STANDBY FUNC MODE
MANUAL
MUSIC
AUTO
FIXTURE PRESET CHASE BANK MANUAL MUSIC
STAND-ALONE 2
GROUP REC BANK COPY
Example 1: Factory-set arrangement
If the arrangement of the spotlights /derby
lights has been changed, automatic redirec-
tion of the control signals will result in a differ-
ent order . In the following example, the lights
2 and 4 have been interchanged:
1 4
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
STANDBY FUNC MODE
STAND-ALONE 1 FIXTURE MOVEMENT CUE OVERRIDE CENTER PROGRAM TAP
INSERT STAND-ALONE
STANDBY FUNC MODE
MANUAL
MUSIC
AUTO
FIXTURE PRESET CHASE BANK MANUAL MUSIC
STAND-ALONE 2
GROUP REC BANK COPY
Example 2: Order of the controls when the arrange-
ment has been changed and the system
settings remain the same
18
If the arrangement of the spotlights/derby
lights has been changed and the order of
the controls is to be the same as the order of
the lights, change the settings of the menu
item
1) Press the button MENU to select the menu
2) Use the button
1 ... 4 has been
)
1 ... 4 ) and will
3) The digit on the left starts flashing, i .e .
4) To be able to control a different spotlight/
will be controlled via
the DMX channels
1 – 5
6 – 10
11 – 15
16 – 20
3 4
CH1
STANDBY FUNC
STAND-ALONE 1
STANDBY FUNC
STAND-ALONE 2
CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH 20 CH 21 CH 22 CH 23 CH 24
Example 3: Order of the controls when the arrange-
1 2 3 4 5 6 7 8 9 10
BLACK OUT
AUTO 11 12 13 14 15 16 17 18 19 20
DEL
5) Finally press the button ENTER to save the
6.2 Disabling the wireless footswitch
In the factory settings, the wireless footswitch
mode is enabled . To disable the footswitch
mode when the footswitch is not required or
3 2
when the FXBAR-5SET changes the mode in-
advertently (e . g . due to interference signals):
1) Press the button MENU to select the menu
2) Use the button
CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH 20 CH 21 CH 22 CH 23 CH 24
1 2 3 4 5 6 7 8 9 10
BLACK OUT
AUTO 11 12 13 14 15 16 17 18 19 20
DEL
3) Use the button
:
item . Press the button ENTER . The dis-
play will indicate the submenu item most
recently selected .
or to select the sub-
 
menu item . Press the button ENTER .
The display will indicate the configuration:
1 2 3 4  Channel group
1-5 6-10 11-15 16-20
Channels
 Spotlights / Derby lights
channel group 1 has been selected . Press
the button to select the groups one

after the other .
derby light with a channel group, press
the button repeatedly until the number

of the corresponding light is indicated on
the display .
Example:
1 4 3 2
CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH17
MODE
FIXTURE MOVEMENT CUE OVERRIDE CENTER PROGRAM TAP BLACK OUT 1 2 3
INSERT STAND-ALONE
MODE
MANUAL
MUSIC
AUTO
FIXTURE PRESET CHASE BANK MANUAL MUSIC AUTO 11 12 13
GROUP REC BANK COPY DEL
ment of the spotlights / derby lights and
the system settings have been changed
settings .
item . Press the button ENTER . The dis-
play will indicate the submenu item most
recently selected .
or to select the sub-
 
menu item . Press the button ENTER .
The display will indicate the current set-
ting .
or to enable (on) or
 
disable (off) the footswitch mode . Press
the button ENTER to save the setting .

6.3 Reset

The factory settings of the FXBAR-5SET can
be found below . In the menu structure on
page 14, the boxes containing the factory
settings are printed in bold .
Subject
Show program
mode
Colour mode
➊ ... ➍
DMX
System settings
Reset to the factory settings:
1) Press the button MENU to select the menu
item
play will indicate the submenu item most
recently selected .
2) Use the button
menu item
The display will briefly indicate the firm-
ware version (e . g .
program

6.4 Test

A test can be performed to check all LEDs,
CH18 CH19 CH 20 CH 21 CH 22 CH 23 CH 24
lasers and motors:
4 5 6 7 8 9 10
1) Press the button MENU to select the menu
14 15 16 17 18 19 20
item
play will indicate the submenu item most
recently selected .
2) Use the button
menu item
diately:
– During the first 30 s, the show programs
will be tested . If music is picked up by
the microphone, the programs will be
music-controlled; if not, they will be
executed automatically .
– After 30 s, the display will go to
LEDs and lasers will emit light at maxi-
mum brightness and all motors will run
at maximum speed .
3) To exit the test, press the button MENU .
Factory settings
Function Setting
program
program number
with all effects
program speed S. 80
red, green and
brightness blue at max.
brightness (255) stroboscope off (S. 00)
start address 001
number of
27
channels
spotlight / derby
1 2 3 4
light configuration
wireless foot-
on
switch mode
auto-off feature
for display off
backlight
. Press the button ENTER . The dis-
or to select the sub-
 
. Press the button ENTER .
) before the show
is selected .
. Press the button ENTER . The dis-
or to select the sub-
 
. Testing will start imme-
. All