Bevel Gear; Sharpening Grass Cutters And Grass Blades - Husqvarna 125R Manual De Instrucciones

MAINTENANCE
Bevel gear
The bevel gear is filled with the right quan-
tity of grease at the factory. However, be-
fore using the machine you should check
that the bevel gear is filled three-quarters
full with grease. Use HUSQVARNA special
grease.
The grease in the bevel gear does not nor-
mally need to be changed except if repairs
are carried out.
Sharpening grass cutters and
grass blades
WARNING:
Always stop the en-
gine before doing any work on the
cutting attachment. This continues
to rotate even after the throttle has
been released. Ensure that the cut-
ting attachment has stopped com-
pletely and disconnect the HT lead
from the spark plug before you start
to work on it.
• See the cutting attachment packaging for
correct sharpening instructions.
• Sharpen blades and cutters using a
single-cut flat file.
• Sharpen all edges equally to maintain the
batance of the blade.
WARNING:
Always discard a
blade that is bent, twisted, cracked,
broken or damaged in any other
way. Never attempt to straighten a
twisted blade so that it can be re-
used. Only use original blades of the
specified type.
22